Xtun-1004, Xtun-1998, Xtun-1999 – Dell POWEREDGE M1000E User Manual
Page 726: Xtun-2000
650
Fabric OS Message Reference
53-1001767-01
XTUN-1004
108
Probable Cause
Indicates a message transmission failure.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your customer support for
assistance.
Severity
ERROR
XTUN-1004
Message
<timestamp>, [XTUN-1004], <sequence-number>,, ERROR, <system-name>, Exchange
aborted:I/T/L:<FC Initiator ID> <FC Target ID> <FCP Logical Unit Number>.
Probable Cause
Indicates that the FCP exchange has been aborted by the Initiator.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your customer support for
assistance.
Severity
ERROR
XTUN-1998
Message
<timestamp>, [XTUN-1998], <sequence-number>,, INFO, <system-name>, FTRACE buffer
<FTRACE Trace Buffer Number> has been cleared.
Probable Cause
Indicates that a CLI command caused the trace buffer to be put back into the FTRACE free pool.
Recommended
Action
No action is required.
Severity
INFO
XTUN-1999
Message
<timestamp>, [XTUN-1999], <sequence-number>,, WARNING, <system-name>, FTRACE
buffer <FTRACE Trace Buffer Number> has been triggered.
Probable Cause
Indicates that a programmed trigger event has been detected.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your customer support for
assistance.
Severity
WARNING
XTUN-2000
Message
<timestamp>, [XTUN-2000], <sequence-number>,, INFO, <system-name>, FCIP Tunnel
<Tunnel Number> UP.
Probable Cause
Indicates that the specified FCIP tunnel is up.