Spc-3007, Spc-3008, Spc-3009 – Dell POWEREDGE M1000E User Manual
Page 653
Fabric OS Message Reference
577
53-1001767-01
SPC-3007
93
SPC-3007
Message
<timestamp>, [SPC-3007], <sequence-number>,, ERROR, <system-name>, <slot number
containing Encryption Engine>, <module name>: DEK create error: <SP status code>,
info: <other info>.
Probable Cause
Indicates the cause depends on the SP status code:
•
2 - Invalid input DEK specification
•
21 - No primary KEK exists with which to wrap the DEK
•
14 - Creation not allowed: primary KEK generation is in progress
•
31 - DEK could not be wrapped
•
73 - Invalid KEK format
•
other - Internal error
Recommended
Action
For status code 14, complete primary KEK generation; otherwise, contact technical support.
Severity
ERROR
SPC-3008
Message
<timestamp>, [SPC-3008], <sequence-number>,, INFO, <system-name>, <slot number
containing Encryption Engine>, <module name>: SP crypto got READY notification.
Probable Cause
Indicates the key application (KPD) within the Crypto Module of the EE has been started.
Recommended
Action
No action is required.
Severity
INFO
SPC-3009
Message
<timestamp>, [SPC-3009], <sequence-number>,, ERROR, <system-name>, <slot number
containing Encryption Engine>, <module name>: FIPS certificate mismatch,
certificate: <FIPS certificate is CO-0 or User-1>.
Probable Cause
Indicates the FIPS certificate within the Crypto Module does not match that of the node.
Recommended
Action
Zeroize the EE (after backing up any needed primary or secondary KEK), then run initEE and regEE.
Severity
ERROR