Dell POWEREDGE M1000E - Manual (Page 326)

250 Fabric OS Message Reference
53-1001767-01
FICN-1038
35
FICN-1038
Message
<timestamp>, [FICN-1038], <sequence-number>,, ERROR, <system-name>,
fcFicIngHost:FDCB Lookup failed for Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort>.
Probable Cause Indicates a locally connected FICON channel sent a frame that could not be associated with a
FICON device.
Recommended
Action
Contact your vendor's customer support for assistance.
Severity ERROR
FICN-1039
Message
<timestamp>, [FICN-1039], <sequence-number>,, ERROR, <system-name>, HostIng:FCUB
Lookup failed for Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR>.
Probable Cause Indicates a locally connected FICON channel sent a frame that could not be associated with a
FICON Control Unit.
Recommended
Action
Contact your vendor's customer support for assistance.
Severity ERROR
FICN-1040
Message
<timestamp>, [FICN-1040], <sequence-number>,, ERROR, <system-name>,
HostTapeEgr:Tape:CmdReject Sense Data Rcvd:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>LastCmds=0x<Last 4 commands
received from the channel for this device> SenseData:Bytes0-0xB=0x<Bytes 0-3 of
sense data from the device> <Bytes 4-7 of sense data from the device> <Bytes
8-0x0b of sense data from the device>.
Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel.
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1041
Message
<timestamp>, [FICN-1041], <sequence-number>,, ERROR, <system-name>,
HostTapeEgr:AS Link Level Reject (LRJ) from CU Rx Path=<VEPortNumber HostDomain
HostPort DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr>LastCmd=0x<Last 4
commands issued to this device from the channel> LastStatus=0x<Last 4 status
values sent to the channel from this device>.