Dell POWEREDGE M1000E - Manual (Page 317)

Fabric OS Message Reference 241
53-1001767-01
FICN-1007
35
FICN-1007
Message
<timestamp>, [FICN-1007], <sequence-number>,, ERROR, <system-name>,
DevDiskEgr:FICON Selective Reset:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> State=0x<current Emulation
State> stat_array=0x<last 4 Status values that were received from the device>.
Probable Cause Indicates a Selective Reset from the channel was received as either a normal part of path recovery
or starting sequence in an error case.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support.
Severity ERROR
FICN-1008
Message
<timestamp>, [FICN-1008], <sequence-number>,, ERROR, <system-name>,
DevDiskEgr:FICON Purge Path received Path=<VEPortNumber HostDomain HostPort
DeviceDomcontactain> <DevicePort LPAR CUADDR DeviceAddr>.
Probable Cause Indicates a FICON Purge Path was received from the channel as a part of path recovery.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity ERROR
FICN-1009
Message
<timestamp>, [FICN-1009], <sequence-number>,, INFO, <system-name>,
DevIng:CmdReject Sense Data rcvd:Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> <Current Emulation State>
LastCmds=<the Last 4 commands issued to the device> Sense Data:Bytes0-0xB=<bytes
0-3 of sense data from the device> <bytes 4-7 of sense data from the device>
<bytes 8-0x0b of sense data from the device>.
Probable Cause Indicates a Unit Check status was received from a device and a sense command was issued to
read the sense data.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity INFO
FICN-1010
Message
<timestamp>, [FICN-1010], <sequence-number>,, INFO, <system-name>,
DevDiskEgr:Device level exception flag found for Path=<VEPortNumber HostDomain
HostPort DeviceDomain>8X<DevicePort LPAR CUADDR DeviceAddr>8X: Oxid=0x<The OXID
that was reported in the Device Level Exception Frame>4X.