Dell POWEREDGE M1000E - Manual (Page 587)

Fabric OS Message Reference 511
53-1001767-01
SEC-1041
90
Severity ERROR
SEC-1041
Message
<timestamp>, [SEC-1041], <sequence-number>,, ERROR, <system-name>, Invalid port
member <port member> in portlist (<port list>). <Reason>.
Probable Cause Indicates the port member is invalid for one of the following reasons:
• The value is not a number.
• The value is too long. Valid numbers must be between one and three characters long.
• The value cannot be parsed due to invalid characters.
Recommended
Action
Use valid syntax when entering the port members.
Severity ERROR
SEC-1042
Message
<timestamp>, [SEC-1042], <sequence-number>,, ERROR, <system-name>, Invalid
index/area member <port member> in portlist (<Port list>). Out of range (<Minimum
value> - <Maximum value>).
Probable Cause Indicates the specified index or area member is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering index or area numbers.
Severity ERROR
SEC-1043
Message
<timestamp>, [SEC-1043], <sequence-number>,, ERROR, <system-name>, Invalid port
range <Minimum> - <Maximum>.
Probable Cause Indicates the specified port is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering port ranges.
Severity ERROR
SEC-1044
Message
<timestamp>, [SEC-1044], <sequence-number>,, ERROR, <system-name>, Duplicate
member <member ID> in (<List>).