Dell POWEREDGE M1000E - Manual (Page 345)

Fabric OS Message Reference 269
53-1001767-01
FICU-1014
36
FICU-1014
Message
<timestamp>, [FICU-1014], <sequence-number>,, INFO, <system-name>, CUP SBTOV
Timeout - %s, Type(%s).
Probable Cause Indicates that the FICON Host failed to send an IU within the SBTOV.
Recommended
Action
No Action is required.
Severity INFO
FICU-1015
Message
<timestamp>, [FICU-1015], <sequence-number>,, INFO, <system-name>, CUP SB
Recovery DIB - %s, DIB_Type(%s).
Probable Cause Indicates that the recovery DIB has been received.
Recommended
Action
No Action is required.
Severity INFO
FICU-1016
Message
<timestamp>, [FICU-1016], <sequence-number>,, INFO, <system-name>, CUP Exchange
Abort - PortIdx(%02X), PortAddr(%02X), XID(%02X).
Probable Cause Indicates that the CUP Exchange Abort was received.
Recommended
Action
No Action is required.
Severity INFO
FICU-1017
Message
<timestamp>, [FICU-1017], <sequence-number>,, WARNING, <system-name>, FMSMODE
enable failed because reserved area is bound to a device.
Probable Cause Indicates one or both of the reserved areas 0xFE and 0xFF is bound to a device.
Recommended
Action
Issue wwnaddress --show command to see all the devices currently bound to areas. Use
wwnaddress --unbind [WWN] command to release the reserved area from the device.
Severity WARNING