Rtwr system messages, Chapter 87, Rtwr-1001 – Dell POWEREDGE M1000E User Manual
Page 573: Rtwr-1002, Chapter
Fabric OS Message Reference
497
53-1001767-01
Chapter
87
RTWR System Messages
RTWR-1001
Message
<timestamp>, [RTWR-1001], <sequence-number>,, ERROR, <system-name>, RTWR
<routine: error message> 0x<detail 1>, 0x<detail 2>, 0x<detail 3>, 0x<detail 4>,
0x<detail 5>
Probable Cause
Indicates that an error has occurred in the RTWR. The message provides the name of the routine
having the error, and more specific error information. The values from 1 through 5 provide more
information.
Recommended
Action
No action is required.
Severity
ERROR
RTWR-1002
Message
<timestamp>, [RTWR-1002], <sequence-number>,, WARNING, <system-name>, RTWR <error
message> 0x<detail1>, 0x<detail2>, 0x<detail3>, 0x<detail4>, 0x<detail5>
Probable Cause
Indicates that the RTWR has exhausted the maximum number of retries by sending data to the
specified domain. Possible detail values include:
•
RTWRTransmit: Max retries exhausted
•
detail1: Port
•
detail2: Domain
•
detail3: Retry Count
•
detail4: Status
•
detail5: Process ID
Recommended
Action
Run the fabricShow command to see if the specified domain ID is online.
Enable the switch with the specified domain ID.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers and run the supportSave command then contact your switch service provider.
Severity
WARNING