Dell POWEREDGE M1000E - Manual (Page 400)

324 Fabric OS Message Reference
53-1001767-01
FW-1300
42
Severity INFO
FW-1300
Message
<timestamp>, [FW-1300], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of hypertext transfer protocol (HTTP) violations has changed. HTTP
violations indicate that a browser connection request has been received from an unauthorized IP
address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to
establish browser connections to the switches in the fabric.
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity INFO
FW-1301
Message
<timestamp>, [FW-1301], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of hypertext transfer protocol (HTTP) violations has fallen below the low
boundary. HTTP violations indicate that a browser connection request has been received from an
unauthorized IP address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that
are authorized to establish browser connections to the switches in the fabric.
Recommended
Action
No action is required.
Severity INFO
FW-1302
Message
<timestamp>, [FW-1302], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of hypertext transfer protocol (HTTP) violations has risen above the high
boundary. HTTP violations indicate that a browser connection request has been received from an
unauthorized IP address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that
are authorized to establish browser connections to the switches in the fabric.
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity WARNING