Dell POWEREDGE M1000E - Manual (Page 385)

Fabric OS Message Reference 309
53-1001767-01
FW-1174
42
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1174
Message
<timestamp>, [FW-1174], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of protocol errors that the port experiences has risen above the high
boundary. Occasional protocol errors occur due to software glitches. Persistent protocol errors
occur due to hardware problems.
Recommended
Action
Check both ends of your connection. Verify that your cable and small form-factor pluggable (SFP)
are not faulty.
Severity WARNING
FW-1175
Message
<timestamp>, [FW-1175], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the number of protocol errors that the port experiences has changed from a value
outside of the acceptable range to a value within the acceptable range. Occasional protocol errors
occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1176
Message
<timestamp>, [FW-1176], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of invalid words that the port experiences has changed. Invalid words
usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable.
Recommended
Action
Check both ends of your connections, your SFP, and your cable to verify that none are faulty.
Severity INFO