Dell POWEREDGE M1000E - Manual (Page 269)

Fabric OS Message Reference 193
53-1001767-01
FABS-1015
27
Severity ERROR
FABS-1015
Message
<timestamp>, [FABS-1015], <sequence-number>,, ERROR, <system-name>, <Method
name>[<Method tag number>]:Request to enable FRU type 0x<FRU Object type>, unit
<Unit number> failed. err code <Error code>
Probable Cause Indicates the specified FRU could not be enabled. This is usually an internal Fabric OS problem.
Recommended
Action
Try removing and reinserting the FRU.
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR