Ficn-1031, Ficn-1032, Ficn-1033 – Dell POWEREDGE M1000E User Manual
Page 324: Ficn-1034
248
Fabric OS Message Reference
53-1001767-01
FICN-1031
35
FICN-1031
Message
<timestamp>, [FICN-1031], <sequence-number>,, WARNING, <system-name>,
HostDiskIng:FICON System Reset received on Path=<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR><CUADDR>.
Probable Cause
Indicates the FICON channel sent a System Reset to the disk control unit.
Recommended
Action
No action is required. The MVS system was either set to IPL or performing error recovery.
Severity
WARNING
FICN-1032
Message
<timestamp>, [FICN-1032], <sequence-number>,, INFO, <system-name>,
HostDiskIng:XRC Read Channel Extender Capabilities detected on Path:
<VEPortNumber HostDomain HostPort DeviceDomain> <DevicePort LPAR CUADDR
DeviceAddr>.
Probable Cause
Indicates the XRC System Data mover was restarted to discover the capabilities of the channel
extension equipment.
Recommended
Action
No action is required. This is a part of the XRC initialization.
Severity
INFO
FICN-1033
Message
<timestamp>, [FICN-1033], <sequence-number>,, INFO, <system-name>,
HostEgr:Logical Path Established on Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR> <CUADDR>.
Probable Cause
Indicates the peer side FICON Control Unit has accepted a logical path establishment command
sequence with the FICON channel.
Recommended
Action
No action is required. This is a part of the FICON path initialization.
Severity
INFO
FICN-1034
Message
<timestamp>, [FICN-1034], <sequence-number>,, ERROR, <system-name>,
HostEgr:Discarding Invalid LRCd Frame on Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort> count=<The total number of frames that have been
received with an invalid LRC>.