Dell POWEREDGE M1000E - Manual (Page 429)

Fabric OS Message Reference 353
53-1001767-01
FW-1525
42
FW-1525
Message
<timestamp>, [FW-1525], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has changed and
crossed lower threshold boundary to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1526
Message
<timestamp>, [FW-1526], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has changed and
dropped below upper threshold boundary to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1527
Message
<timestamp>, [FW-1527], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of state changes that the port experiences has changed and crossed
lower threshold boundary to a value within the acceptable range. The state of the port has changed
for one of the following reasons: the port has gone offline, has come online, is testing, is faulty, has
become an E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1528
Message
<timestamp>, [FW-1528], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.