Dell POWEREDGE M1000E - Manual (Page 334)

258 Fabric OS Message Reference
53-1001767-01
FICN-1066
35
FICN-1066
Message
<timestamp>, [FICN-1066], <sequence-number>,, WARNING, <system-name>,
MemAllocFailed for GEPort=<GE0 or GE1 Number> VEport=<VEPortNumber> could not
create required structure.
Probable Cause Indicates an internal resource limit has been encountered such that additional control block
memory could not be allocated.
Recommended
Action
This is an unexpected event, either the maximum number of emulation devices are already in use
or there is an internal memory leak, contact your vendor's customer support for assistance.
Severity WARNING
FICN-1067
Message
<timestamp>, [FICN-1067], <sequence-number>,, ERROR, <system-name>, Ingress
Abort:Oxid=0x<the OXID of the aborted exchange>:Abort for CH=0x<VEPortNumber
HostDomain HostPort DeviceDomain> <DevicePort LPAR>.
Probable Cause Indicates an abort operation has been received from a local FC interface for an emulation CH
exchange.
Recommended
Action
If there were associated IO errors at the same time as this event, contact your vendor's customer
support for assistance.
Severity ERROR
FICN-1068
Message
<timestamp>, [FICN-1068], <sequence-number>,, ERROR, <system-name>, Ingress
Abort:Oxid=0x<the OXID of the aborted exchange>:Abort for CU=0x<VEPortNumber
HostDomain HostPort DeviceDomain> <DevicePort LPAR> <CUADDR>.
Probable Cause Indicates an abort operation has been received from a local FC interface for an emulaton CU
exchange.
Recommended
Action
If there were associated IO errors at the same time as this event, please contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1069
Message
<timestamp>, [FICN-1069], <sequence-number>,, ERROR, <system-name>, Emulation
Configuration Error on TunnelId <Tunnel ID>.
Probable Cause Indicates an error has been noted in the FICON configuration. Refer to the string for the nature of
the configuration issue.