Dell POWEREDGE M1000E - Manual (Page 161)

Fabric OS Message Reference 85
53-1001767-01
C2-1009
11
C2-1009
Message
Message <timestamp>, [C2-1009], <sequence-number>,, WARNING, <system-name>, <slot
number>, <port number><blade port number>: portcfglongdistance
vc_translation_link_init = 1 overwrites fill word IDLE. ARB will be used on the
link.
Probable Cause Indicates portcfglongdistance vc_translation_link_init 1 overwrites fill word IDLE. ARB will be used
on the link.
Recommended
Action
No action is required.
Severity WARNING
C2-1010
Message
Message <timestamp>, [C2-1010], <sequence-number>,, CRITICAL, <system-name>, S
<slot number>, C <chip index>: Internal monitoring has identified suspect
hardware, blade may need to be reset or replaced: fault1:<fault1_cnt>,
fault2:<fault2_cnt> th2:0x<threshold_used>.
Probable Cause Indicates above normal errors observed in hardware that may or may not impact data traffic.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.
Severity CRITICAL
C2-1011
Message
Message <timestamp>, [C2-1011], <sequence-number>,, WARNING, <system-name>, S
<slot number>, P <port number><blade port number>: Primitive received with
Encoding errors, do AL_RESET.
Probable Cause Indicates encoding errors on the internal links.
Recommended
Action
This error can cause CRC errors or frame loss. If the error is observed continuously, power cycle the
affected blade first. If the problem persists, check the backplane and/or replace the blade.
Severity WARNING