Zone-1034, Zone-1035, Zone-1036 – Dell POWEREDGE M1000E User Manual
Page 741
Fabric OS Message Reference
665
53-1001767-01
ZONE-1034
111
Probable Cause
Indicates the specified domain has the lowest memory available for the zone database in the
fabric. The zone database must be smaller than the memory available on this domain.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity
ERROR
ZONE-1034
Message
<timestamp>, [ZONE-1034], <sequence-number>,, INFO, <system-name>, A new zone
database file is created.
Probable Cause
Indicates that a new zone database was created.
Recommended
Action
No action is required.
Severity
INFO
ZONE-1035
Message
<timestamp>, [ZONE-1035], <sequence-number>,, ERROR, <system-name>, Unable to
rename <Old config file name> to <New config file name>: error message <System
Error Message>.
Probable Cause
Indicates the Fabric OS cannot rename the zone configuration file. Typically the zone configuration
is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity
ERROR
ZONE-1036
Message
<timestamp>, [ZONE-1036], <sequence-number>,, ERROR, <system-name>, Unable to
create <config file name>: error message <System Error Message>.
Probable Cause
Indicates the Fabric OS cannot create the zone configuration file. Typically the zone configuration is
too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity
ERROR