Dell POWEREDGE M1000E - Manual (Page 259)

Fabric OS Message Reference 183
53-1001767-01
FABR-1030
26
• VC_RDY mode: Virtual-channel flow control mode. This is a proprietary protocol.
• R_RDY mode: Receiver-ready flow control mode. This is the Fibre Channel standard protocol,
that uses R_RDY primitive for flow control.
• DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer
credits are fixed, based on the port configuration information. In this mode, the buffer credits
are negotiated as part of exchange link parameter (ELP) exchange. This mode also uses the
R_RDY primitive for flow control.
Recommended
Action
No action is required.
Severity INFO
FABR-1030
Message
<timestamp>, [FABR-1030], <sequence-number>,, INFO, <system-name>, fabric: Domain
<new domain ID> (was <old domain ID>).
Probable Cause Indicates that the domain ID has changed.
Recommended
Action
No action is required.
Severity INFO
FABR-1031
Message
<timestamp>, [FABR-1031], <sequence-number>, FFDC, WARNING, <system-name>,
Maximum number of retries sending ILS from port <port number> exceeded.
Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service (ILS) to
the iswitchd demon on the specified E_Port.
Recommended
Action
Run the top command to see if iswitchd is extremely busy or if another process is using excessive
CPU resources.
Severity WARNING
FABR-1032
Message
<timestamp>, [FABR-1032], <sequence-number>, WARNING, <system-name>, Remote
switch with domain ID <domain ID>and switchname <switchname>running an unsupported
FOS version v2.x has joined the fabric.
Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric.
Recommended
Action
Remove the switch with the unsupported Fabric OS version 2.x from the fabric.