Dell POWEREDGE M1000E - Manual (Page 338)

262 Fabric OS Message Reference
53-1001767-01
FICN-1079
35
Recommended
Action
No action is required.
Severity INFO
FICN-1079
Message
<timestamp>, [FICN-1079], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:WriteReport:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle state to non-idle
state transitions while this tape was loaded>:Cmds=0x<the number of emulated host
read commands processed while this tape was loaded>:Chains=0x<the number of
emulated host chains processed while this tape was loaded>:MBytes=<the number of
emulated read Kilobytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and Read
Block pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1080
Message
<timestamp>, [FICN-1080], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:ReadCpReport:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle state to non-idle
state transitions while this tape was loaded>:Cmds=0x<the number of emulated host
read commands processed while this tape was loaded>:Chains=0x<the number of
emulated host chains processed while this tape was loaded>:MBytes=<the number of
emulated read Kilobytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and Read
Channel Program pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1081
Message
<timestamp>, [FICN-1081], <sequence-number>,, WARNING, <system-name>,
DevTapeIng:LRJ received on Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands received from the
channel for this device> lastStatus=0x<Last 4 status values presented to the
channel for this device> treating as system reset event.
Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established
to the CU.