Dell POWEREDGE M1000E - Manual (Page 388)

312 Fabric OS Message Reference
53-1001767-01
FW-1184
42
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check
your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
Severity INFO
FW-1184
Message
<timestamp>, [FW-1184], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the percentage of incoming traffic that the port experiences has changed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1185
Message
<timestamp>, [FW-1185], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the percentage of incoming traffic that the port experiences has fallen below the low
boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1186
Message
<timestamp>, [FW-1186], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the percentage of incoming traffic that the port experiences has risen above the high
boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO