Dell POWEREDGE M1000E - Manual (Page 396)

320 Fabric OS Message Reference
53-1001767-01
FW-1247
42
FW-1247
Message
<timestamp>, [FW-1247], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed
from a value outside of the acceptable range to a value within the acceptable range. Receive
performance messages appear due to the number of word frames that travel from the configured
S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1248
Message
<timestamp>, [FW-1248], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has changed.
Transmit performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1249
Message
<timestamp>, [FW-1249], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has fallen
below the low boundary. Transmit performance messages appear due to the number of word
frames that travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1250
Message
<timestamp>, [FW-1250], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.