Ficn-1073, Ficn-1074, Ficn-1075 – Dell POWEREDGE M1000E User Manual
Page 336
260
Fabric OS Message Reference
53-1001767-01
FICN-1073
35
FICN-1073
Message
<timestamp>, [FICN-1073], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Unloaded:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:states=0x<4 prior emulation
states>:cmds=0x<last 4 commands received from the channel for this
device>:status=0x<last 4 status values sent to the channel for this
device>:flags=0x<tape report bit flags (0x80-Tape
Loaded,0x40-WriteEmul,0x20-RdBlkEmul,0x10-RdCpEmul)>.
Probable Cause
Indicates a Rewind and Unload IO has been processed from a locally connected LPAR, which
indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
Severity
INFO
FICN-1074
Message
<timestamp>, [FICN-1074], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:WriteReport:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle state to non-idle
state transitions while this tape was loaded>:Cmds=0x<the number of emulated host
write commands processed while this tape was loaded>:Chains=0x<the number of
emulated host chains processed while this tape was loaded>:MBytes=<the number of
emulated write megabytes processed while this tape was loaded>.
Probable Cause
Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and write
pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity
INFO
FICN-1075
Message
<timestamp>, [FICN-1075], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:ReadBlkReport:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle state to non-idle
state transitions while this tape was loaded>:Cmds=0x<the number of emulated host
read commands processed while this tape was loaded>:Chains=0x<the number of
emulated host chains processed while this tape was loaded>:MBytes=<the number of
emulated read megabytes processed while this tape was loaded>.
Probable Cause
Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and Read
Block pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.