Dell POWEREDGE M1000E - Manual (Page 599)

Fabric OS Message Reference 523
53-1001767-01
SEC-1092
90
SEC-1092
Message
<timestamp>, [SEC-1092], <sequence-number>,, ERROR, <system-name>, <Policy name>
Name not found.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR
SEC-1093
Message
<timestamp>, [SEC-1093], <sequence-number>,, ERROR, <system-name>, New FCS list
must have at least one member in common with current FCS list.
Probable Cause Indicates the new fabric configuration server (FCS) list does not have a common member with the
existing FCS list.
Recommended
Action
Resubmit the command with at least one member of the new FCS list in common with the current
FCS list.
Severity ERROR
SEC-1094
Message
<timestamp>, [SEC-1094], <sequence-number>,, ERROR, <system-name>, Policy member
not found.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR
SEC-1095
Message
<timestamp>, [SEC-1095], <sequence-number>,, ERROR, <system-name>, Deleting FCS
policy is not allowed.