Dell POWEREDGE M1000E - Manual (Page 344)

268 Fabric OS Message Reference
53-1001767-01
FICU-1010
36
FICU-1010
Message
<timestamp>, [FICU-1010], <sequence-number>,, WARNING, <system-name>, FMS Mode
enable failed due to address conflict with port <port number> .
Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode (fmsMode) was not
enabled because the specified port which has an address conflict with the CUP management port
is in use.
Recommended
Action
Use the portDisable command to disable the specified port to avoid the port address conflict.
Severity WARNING
FICU-1011
Message
<timestamp>, [FICU-1011], <sequence-number>,, INFO, <system-name>, FMS mode has
been enabled.
Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode has been enabled.
Recommended
Action
No action is required.
Severity INFO
FICU-1012
Message
<timestamp>, [FICU-1012], <sequence-number>,, INFO, <system-name>, FMS mode has
been disabled.
Probable Cause Indicates that the Fibre Connectivity (FICON) Management Server mode has been disabled.
Recommended
Action
No action is required.
Severity INFO
FICU-1013
Message
<timestamp>, [FICU-1013], <sequence-number>,, WARNING, <system-name>, Host data
file cannot be resetted to proper size.
Probable Cause Indicates that the file system is too full to create a host data file of the proper size.
Recommended
Action
Create additional room in the file system and initiate a warm recovery.
Severity WARNING