Conf system messages, Chapter 17, Conf-1000 – Dell POWEREDGE M1000E User Manual
Page 193: Conf-1001, Conf-1020, Chapter
Fabric OS Message Reference
117
53-1001767-01
Chapter
17
CONF System Messages
CONF-1000
Message
<timestamp>, [CONF-1000], <sequence-number>, AUDIT, INFO, <system-name>,
configDownload completed successfully. <Info about the parameters and AD>.
Probable Cause
Indicates that the configDownload operation was initiated and completed successfully. The
statement that follows, message strings, is the description of the classes of configuration
parameters that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in
the description.
Recommended
Action
No action is required.
Severity
INFO
CONF-1001
Message
<timestamp>, [CONF-1001], <sequence-number>,, INFO, <system-name>, configUpload
completed successfully. <Info about the parameters and AD>.
Probable Cause
Indicates that the configUpload operation was initiated and completed successfully. The statement
that follows, message strings, is the description of the classes of configuration parameters that
were uploaded. If AD is enabled, the AD number is specified in the description.
Recommended
Action
No action is required.
Severity
INFO
CONF-1020
Message
<timestamp>, [CONF-1020], <sequence-number>,, INFO, <system-name>, configDownload
not permitted <AD Number if AD is configured on the system>.
Probable Cause
Indicates a configDownload operation is not permitted. There are many possible causes.
Recommended
Action
Check the error log, correct the error and rerun the configdownload command.
Severity
INFO