Dell POWEREDGE M1000E - Manual (Page 373)

Fabric OS Message Reference 297
53-1001767-01
FW-1118
42
FW-1118
Message
<timestamp>, [FW-1118], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has fallen below the low boundary. The
following occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
A low number of fabric reconfigurations means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1119
Message
<timestamp>, [FW-1119], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has risen above the high boundary. The
following occurrences can cause a fabric reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
Verify that all interswitch link (ISL) cables are properly connected at both ends. Verify that the small
form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be
a transient error and might not require troubleshooting.
Severity INFO
FW-1120
Message
<timestamp>, [FW-1120], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has changed from a value outside of the
acceptable range to a value within the acceptable range. The following occurrences can cause a
fabric reconfiguration: