Spc-2009, Spc-2010, Spc-2011 – Dell POWEREDGE M1000E User Manual
Page 650: Spc-2012
574
Fabric OS Message Reference
53-1001767-01
SPC-2009
93
SPC-2009
Message
<timestamp>, [SPC-2009], <sequence-number>,, CRITICAL, <system-name>, <slot
number containing Encryption Engine>, <module name>: Tamper event: User
zeroization.
Probable Cause
Indicates the Tamper event triggered due to a user zeroize request.
Recommended
Action
EE is zeroized. Run the initEE and regEE commands.
Severity
CRITICAL
SPC-2010
Message
<timestamp>, [SPC-2010], <sequence-number>,, CRITICAL, <system-name>, <slot
number containing Encryption Engine>, <module name>: Crypto subsystem cover is
open.
Probable Cause
Indicates the Crypto subsystem cover is open.
Recommended
Action
Close the crypto subsystem cover properly.
Severity
CRITICAL
SPC-2011
Message
<timestamp>, [SPC-2011], <sequence-number>,, INFO, <system-name>, <slot number
containing Encryption Engine>, <module name>: OB1 crypto BIST success.
Probable Cause
Indicates the FPGA BIST was successful.
Recommended
Action
No action is required.
Severity
INFO
SPC-2012
Message
<timestamp>, [SPC-2012], <sequence-number>,, INFO, <system-name>, <slot number
containing Encryption Engine>, <module name>: User zeroization command completed
successfully. Tamper INT status %x.
Probable Cause
Indicates the User zeroization command has completed successfully.
Recommended
Action
EE is zeroized. Run the initEE and regEE commands.
Severity
INFO