Dell POWEREDGE M1000E - Manual (Page 444)

368 Fabric OS Message Reference
53-1001767-01
HAMK-1004
44
HAMK-1004
Message
<timestamp>,[HAMK-1004], <sequence-number>, SLOT cp-slot-number | CHASSIS, INFO,
<system-name>, Resetting standby CP (double reset may occur).
Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This
message is typically seen when the standby CP has been rebooted. Note that in certain
circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover
automatically even if it has rebooted twice.
Recommended
Action
No action is required.
Severity INFO