Fcr-1080, Fcr-1081, Fcr-1082 – Dell POWEREDGE M1000E User Manual
Page 311
Fabric OS Message Reference
235
53-1001767-01
FCR-1080
34
Recommended
Action
Change the matrix database.
Severity
WARNING
FCR-1080
Message
<timestamp>, [FCR-1080], <sequence-number>,, WARNING, <system-name>, The pause
response timer for domain <Domain> expired.
Probable Cause
Indicates that during the Coordinated HotCode protocol, a switch in the fabric has not responded to
the pause message which prevented the protocol from completing. Any data traffic disruption
observed during the firmware download may have been due to the result of the rejected pause
message.
Recommended
Action
No action is required.
Severity
WARNING
FCR-1081
Message
<timestamp>, [FCR-1081], <sequence-number>,, WARNING, <system-name>, The pause
message is rejected by the domain <Domain>.
Probable Cause
Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the
pause message which prevented the protocol from completing. Any data traffic disruption observed
during the firmware download may have been due to the rejected pause message.
Recommended
Action
No action is required.
Severity
WARNING
FCR-1082
Message
<timestamp>, [FCR-1082], <sequence-number>,, WARNING, <system-name>, The pause
retry count is exhausted for the domain <Domain>.
Probable Cause
Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the
pause message which prevented the protocol from completing. Any data traffic disruption observed
during the firmware download may have been due to this issue.
Recommended
Action
No action is required.
Severity
WARNING