Dell POWEREDGE M1000E - Manual (Page 525)

Fabric OS Message Reference 449
53-1001767-01
NS-1007
72
NS-1007
Message
<timestamp>, [NS-1007], <sequence-number>,, WARNING, <system-name>, NS has
detected a logical ISL port <LISL port number> in TI zone <TI zone name> in fabric
<Fabric ID>. Routing may not be setup correctly.
Probable Cause Indicates that a logical ISL is detected in the TI zone.
Recommended
Action
Remove the LISL port from the TI zone because the routing may not be set up correctly.
Severity WARNING
NS-1008
Message
<timestamp>, [NS-1008], <sequence-number>,, WARNING, <system-name>, Open FR
license not installed.
Probable Cause Indicates that local devices involved in Open FR will not function without the required licensing.
Recommended
Action
Either install the Open FR license or relocate Open FR devices to a licensed switch.
Severity WARNING
NS-1009
Message
<timestamp>, [NS-1009], <sequence-number>,, WARNING, <system-name>, NS has
detected a device with node wwn as zero, pid 0x<device PID>.
Probable Cause Indicates that a port has logged in with node wwn as zero, DCFM wont show port connectivity.
Recommended
Action
Check the device that logged in. The device could be misbehaving.
Severity WARNING
NS-1010
Message
<timestamp>, [NS-1010], <sequence-number>,, WARNING, <system-name>, CSCTL mode
enabled on port <csctlport> QoS zoning will be ignored for devices on this port.
Probable Cause Indicates the CSCTL mode enabled for a port with devices as members of a QoS zone.
Recommended
Action
Remove CSCTL configured devices from QoS zone.
Severity WARNING