Dell POWEREDGE M1000E - Manual (Page 308)

232 Fabric OS Message Reference
53-1001767-01
FCR-1070
34
Probable Cause Indicates that the FC Routing service is enabled. This is caused by either fosConfig –-enable fcr, or
a configDownload with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled
by the factory.
Recommended
Action
No action is required.
Severity INFO
FCR-1070
Message
<timestamp>, [FCR-1070], <sequence-number>,, INFO, <system-name>, The FC Routing
configuration is set to default.
Probable Cause Indicates that the FC Routing configuration is set to default by user. This removes all prior FC
Routing configurations.
Recommended
Action
No action is required.
Severity INFO
FCR-1071
Message
<timestamp>, [FCR-1071], <sequence-number>,, INFO, <system-name>, Port <port
number> is changed from non FCR port to FCR port.
Probable Cause Indicates that the port became an EX_Port or VEX_Port.
Recommended
Action
No action is required.
Severity INFO
FCR-1072
Message
<timestamp>, [FCR-1072], <sequence-number>,, INFO, <system-name>, Port <port
number> is changed from FCR port to non FCR port.
Probable Cause Indicates that the port is no longer an EX_Port or VEX_Port.
Recommended
Action
No action is required.
Severity INFO