Dell POWEREDGE M1000E - Manual (Page 410)

334 Fabric OS Message Reference
53-1001767-01
FW-1368
42
Recommended
Action
No action is required.
Severity INFO
FW-1368
Message
<timestamp>, [FW-1368], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of no-FCS violations has changed. This counter records how often the
switch loses contact with the primary fabric configuration server (FCS) fabric configuration server
(FCS) switch. When the primary FCS switch in the fabric sends its certificate to a switch, the
receiving switch saves the world wide name (WWN) of that primary FCS switch. If a secure switch
finds that there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it
increments this counter and resets the WWN of the primary FCS to all zeroes.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity INFO
FW-1369
Message
<timestamp>, [FW-1369], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of no-FCS violations has fallen below the low boundary. This counter
records how often the switch loses contact with the primary fabric configuration server (FCS)
switch. When the primary FCS switch in the fabric sends its certificate to a switch, the receiving
switch saves the world wide name (WWN) of that primary FCS switch. If a secure switch finds that
there are no FCSs in the fabric, but it still has the WWN of the last primary FCS switch, it increments
this counter and resets the WWN of the primary FCS to all zeroes.
Recommended
Action
No action is required.
Severity INFO
FW-1370
Message
<timestamp>, [FW-1370], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.