Dell POWEREDGE M1000E - Manual (Page 751)

Fabric OS Message Reference 675
53-1001767-01
Chapter
112
AUDIT AG System Messages
AG-1033
Message
AUDIT, <timestamp>, [AG-1033], <sequence-number>,, INFO, <system-name>,F_Port to
N_Port mapping has been updated for N_Port (<n_port>) .
Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the configuration file has been
updated.
Recommended
Action
No action is required.
Severity INFO
AG-1034
Message
AUDIT, <timestamp>, [AG-1034], <sequence-number>,, INFO, <system-name>,F_Port
cannot accept any more logins (<fport>) .
Probable Cause Indicates that the F_Port has already logged in the maximum number of devices.
Recommended
Action
No action is required.
Severity INFO
AG-1035
Message
AUDIT, <timestamp>, [AG-1035], <sequence-number>,, INFO, <system-name>,Device
cannot login as ALPA value not available (<alpa>) .
Probable Cause Indicates that a device has already used this ALPA value.
Recommended
Action
No action is required.
Severity INFO
AG-1036
Message
AUDIT, <timestamp>, [AG-1036], <sequence-number>,, WARNING, <system-name>,Port
<port> is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check
the admin guide for supported configuration .