Dell POWEREDGE M1000E - Manual (Page 799)

Fabric OS Message Reference 723
53-1001767-01
SEC-3039
125
SEC-3039
Message
AUDIT, <timestamp>, [SEC-3039], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: Securty Violation, Status: failed, Info: Unauthorized
host with IP address <IP address of the violating host> tries to establish
connection using <Protocol Connection Type>.
Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in
the message.
Recommended
Action
Check for unauthorized access to the switch through the specified protocol connection. Take
appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-3044
Message
AUDIT, <timestamp>, [SEC-3044], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS mode has been changed to <Fips Mode>.
Probable Cause Indicates there was a change in the FIPS mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3045
Message
AUDIT, <timestamp>, [SEC-3045], INFO, SECURITY, <event-initiator-details>,
<event-location>, System has been zeroized.
Probable Cause Indicates the system has been zeroized.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3046
Message
AUDIT, <timestamp>, [SEC-3046], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS self tests mode has been set to <Self Test Mode>.
Probable Cause Indicates there was a change in the FIPS Self Test mode.