Dell POWEREDGE M1000E - Manual (Page 325)

Fabric OS Message Reference 249
53-1001767-01
FICN-1035
35
Probable Cause Indicates the channel emulation processing received a frame with an invalid FICON LRC from the
peer. This indicates that the channel side noted corruption from the device/CU side processing.
Recommended
Action
Contact your vendor's customer support for assistance.
Severity ERROR
FICN-1035
Message
<timestamp>, [FICN-1035], <sequence-number>,, WARNING, <system-name>,
HostIng:FICON System Reset received on Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort> <LPAR> <CUADDR>.
Probable Cause Indicates a locally connected FICON channel issued a System Reset to the specified FICON Control
Unit.
Recommended
Action
No action is required. This is a part of the FICON path initialization.
Severity WARNING
FICN-1036
Message
<timestamp>, [FICN-1036], <sequence-number>,, INFO, <system-name>, HostIng:FICON
RLP Request on Path=<VEPortNumber HostDomain HostPort DeviceDomain> <DevicePort>
<LPAR> <CUADDR>.
Probable Cause Indicates a locally connected FICON Channel issued a Remove Logical Path sequence to the
specified FICON Control Unit.
Recommended
Action
No action is required. This is a part of the FICON path deactivation.
Severity INFO
FICN-1037
Message
<timestamp>, [FICN-1037], <sequence-number>,, INFO, <system-name>, HostIng:FICON
ELP Request on Path=<VEPortNumber HostDomain HostPort DeviceDomain> <DevicePort>
<LPAR> <CUADDR>.
Probable Cause Indicates a locally connected FICON Channel issued an Establish Logical Path sequence to the
specified FICON Control Unit.
Recommended
Action
No action is required. This is a part of the FICON path activation.
Severity INFO