Fabs-1008, Fabs-1009, Fabs-1010 – Dell POWEREDGE M1000E User Manual
Page 267: Fabs-1011
Fabric OS Message Reference
191
53-1001767-01
FABS-1008
27
Severity
WARNING
FABS-1008
Message
<timestamp>, [FABS-1008], <sequence-number>,, WARNING, <system-name>,
<Function
name>
: Media oid mapping failed
Probable Cause
Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity
WARNING
FABS-1009
Message
<timestamp>, [FABS-1009], <sequence-number>,, WARNING, <system-name>,
<Function
name>
: type is not media
Probable Cause
Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity
WARNING
FABS-1010
Message
<timestamp>, [FABS-1010], <sequence-number>,, WARNING, <system-name>, <Function
name>: Wrong media_event <Event number>
Probable Cause
Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity
WARNING
FABS-1011
Message
<timestamp>, [FABS-1011], <sequence-number>,, ERROR, <system-name>, <Method
name>[<Method tag number>]:Invalid input state 0x<Input state code>
Probable Cause
Indicates an unrecognized state code was used in an internal Fabric OS message for a FRU.