Dell POWEREDGE M1000E - Manual (Page 320)

244 Fabric OS Message Reference
53-1001767-01
FICN-1018
35
Probable Cause Indicates the FICON Control Unit sent an LPE frame to the FICON channel.
Recommended
Action
This is an informational message and does not require any action.
Severity INFO
FICN-1018
Message
<timestamp>, [FICN-1018], <sequence-number>,, ERROR, <system-name>, DevIng:FCUB
Lookup failed for Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain>8x<DevicePort LPAR>2x.
Probable Cause Indicates the FICON Control Unit sent a frame that cannot be associated with a FICON Control Unit
CUADDR.
Recommended
Action
Contact your vendor's customer support for assistance.
Severity ERROR
FICN-1019
Message
<timestamp>, [FICN-1019], <sequence-number>,, ERROR, <system-name>, DevTapeEgr:AS
Link Level Reject (LRJ) from Chan on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain>8X<DevicePort LPAR CUADDR DeviceAddr>8X LastCmd=0x<the Last 4
commands issued to the device>8x LastStatus=0x<the Last 4 status values received
from the device>8x.
Probable Cause Indicates the FICON channel indicated in the path issued an LRJ frame for a sequence from the
device.
Recommended
Action
If there was a job failure associated with this event, contact your vendor's customer support for
assistance.
Severity ERROR
FICN-1020
Message
<timestamp>, [FICN-1020], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Cancel received Path=<VEPortNumber HostDomain HostPort
DeviceDomain> <DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for the device>2X tflags=0x<the current emulation tape control flags for the
device>8X sflags=0x<the current emulation status control flags for the device>4X.
Probable Cause Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity ERROR