Dell POWEREDGE M1000E - Manual (Page 652)

576 Fabric OS Message Reference
53-1001767-01
SPC-3005
93
Probable Cause Indicates the output wrapping KEK for the DEK to be created does not exist within the EE Crypto
Module.
Recommended
Action
For opaque key vaults such as RKM, recover the missing Master Key to current or alternate
position.
Severity ERROR
SPC-3005
Message
<timestamp>, [SPC-3005], <sequence-number>,, ERROR, <system-name>, <slot number
containing Encryption Engine>, <module name>:DEK inject error: <SP status code>,
DEK: <DEK octet 1 or other info> <DEK octet 2> <DEK octet 3> <DEK octet 4>.
Probable Cause Indicates the cause depends on the SP status code:
• 14 - Attempt to inject a DEK to an invalid FPGA table index
• 14 - Invalid input DEK format
• 32 - DEK could not be unwrapped
• 33 - FGPA error upon inject
• 73 - Invalid KEK format
Recommended
Action
Contact technical support.
Severity ERROR
SPC-3006
Message
<timestamp>, [SPC-3006], <sequence-number>,, ERROR, <system-name>, <slot number
containing Encryption Engine>, <module name>:DEK rewrap error: <SP status code>,
DEK: <DEK octet 1 or other info> <DEK octet 2> <DEK octet 3> <DEK octet 4>.
Probable Cause Indicates the cause depends on the SP status code:
• 2 - Invalid input DEK format
• 14 - Rewrapping not allowed: primary KEK generation is in progress
• 31 - DEK could not be wrapped
• 32 - DEK could not be unwrapped
• 33 - FGPA error upon inject
• 73 - Invalid KEK format
Recommended
Action
For status code 14, complete primary KEK generation; otherwise, contact technical support.
Severity ERROR