Dell POWEREDGE M1000E - Manual (Page 582)

506 Fabric OS Message Reference
53-1001767-01
SEC-1016
90
Recommended
Action
Resolve the above specifed error by executing the command only from Primary FCS.
Severity ERROR
SEC-1016
Message
<timestamp>, [SEC-1016], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized host with IP address <IP address of the violating host>
tries to establish SSH connection.
Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in
the message.
Recommended
Action
Check for unauthorized access to the switch through the SSH connection.
Severity INFO
SEC-1022
Message
<timestamp>, [SEC-1022], <sequence-number>,, WARNING, <system-name>, Failed to
<operation> PKI objects.
Probable Cause Indicates the fabric has failed to generate or validate either the public or private key pair or the
certificate signing request (CSR).
Recommended
Action
Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the
Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the
certificate by following the field upgrade process.
Severity WARNING
SEC-1024
Message
<timestamp>, [SEC-1024], <sequence-number>,, INFO, <system-name>, The <DB name>
security database is too large to fit in flash.
Probable Cause Indicates the size of the security database is too large for the flash memory. The size of the security
database increases with the number of entries in each policy.
Recommended
Action
Reduce the size of the security database by reducing the number of entries within each policy.
Severity INFO