Dell POWEREDGE M1000E - Manual (Page 537)

Fabric OS Message Reference 461
53-1001767-01
PDM-1008
75
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1008
Message
<timestamp>, [PDM-1008], <sequence-number>,, WARNING, <system-name>, Failed to
get the number of U_Ports.
Probable Cause Indicates the parity data manager (PDM) system call to getCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1009
Message
<timestamp>, [PDM-1009], <sequence-number>,, WARNING, <system-name>, Can't update
Port Config Data.
Probable Cause Indicates the parity data manager (PDM) system call to setCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1010
Message
<timestamp>, [PDM-1010], <sequence-number>,, WARNING, <system-name>, File open
failed: <file name>, errno= <errno>.
Probable Cause Indicates the parity data manager (PDM) process could not open the specified file.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING