Dell POWEREDGE M1000E - Manual (Page 483)

Fabric OS Message Reference 407
53-1001767-01
Chapter
56
ISNS System Messages
ISNS-1001
Message
<timestamp>, [ISNS-1001], <sequence-number>,, INFO, <system-name>, Configuration
peering with external iSNS server <New config iSNS server IP address> slot/port
<New config Slot number>/ge<New config port number> (current <Current iSNS server
IP address> <Current slot number>/ge<Current port number>).
Probable Cause Indicates that the user has issued the isnscCfg command.
Recommended
Action
No action is required.
Severity INFO
ISNS-1002
Message
<timestamp>, [ISNS-1002], <sequence-number>,, INFO, <system-name>, Start peering
with external iSNS server <iSNS server IP address> slot/port <Slot number>/ge<Port
number>.
Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS)
server.
Recommended
Action
No action is required.
Severity INFO
ISNS-1003
Message
<timestamp>, [ISNS-1003], <sequence-number>,, INFO, <system-name>, Peering with
external iSNS server is disabled.
Probable Cause Indicates the IP address of the internet storage name service (iSNS) server is zero. Hence peering
is disabled.
Recommended
Action
If you wish to enable the iSNS server, use the isnscCfg command to show or set the server IP
address; otherwise, no action is required.
Severity INFO