Dell POWEREDGE M1000E - Manual (Page 559)

Fabric OS Message Reference 483
53-1001767-01
Chapter
82
RAS System Messages
RAS-1001
Message
<timestamp>, [RAS-1001], <sequence-number>,, INFO, <system-name>, First failure
data capture (FFDC) event occurred.
Probable Cause Indicates that a failure data event was captured.
Recommended
Action
Run the supportFtp command (as needed) to set up automatic FTP transfers and run the
supportSave command then contact your switch service provider.
Severity INFO
RAS-1002
Message
<timestamp>, [RAS-1002], <sequence-number>,, WARNING, <system-name>, First
failure data capture (FFDC) maximum storage size ( <log size limit> MB) was
reached.
Probable Cause Indicates that the maximum storage size for FFDC data capture is reached.
Recommended
Action
Run the supportSave command and contact your switch service provider.
Severity WARNING
RAS-1004
Message
<timestamp>, [RAS-1004], <sequence-number>, FFDC, WARNING, <system-name>,
Software 'verify' error detected.
Probable Cause Indicates an internal software error.
Recommended
Action
Run the supportSave command and contact your switch service provider.
Severity WARNING
RAS-1005
Message
<timestamp>, [RAS-1005], <sequence-number>, FFDC, WARNING, <system-name>,
Software 'assert' error detected.