Dell POWEREDGE M1000E - Manual (Page 395)

Fabric OS Message Reference 319
53-1001767-01
FW-1244
42
Severity INFO
FW-1244
Message
<timestamp>, [FW-1244], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed.
Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1245
Message
<timestamp>, [FW-1245], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has fallen below
the low boundary. Receive performance messages appear due to the number of word frames that
travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1246
Message
<timestamp>, [FW-1246], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has risen above
the high boundary. Receive performance messages appear due to the number of word frames that
travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO