Dell POWEREDGE M1000E - Manual (Page 337)

Fabric OS Message Reference 261
53-1001767-01
FICN-1076
35
Severity INFO
FICN-1076
Message
<timestamp>, [FICN-1076], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:ReadCpReport:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle state to non-idle
state transitions while this tape was loaded>:Cmds=0x<the number of emulated host
read commands processed while this tape was loaded>:Chains=0x<the number of
emulated host chains processed while this tape was loaded>:MBytes=<the number of
emulated read megabytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and Read
Channel Program pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1077
Message
<timestamp>, [FICN-1077], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:Unloaded:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:states=0x<4 prior emulation
states>:cmds=0x<last 4 commands received from the channel for this
device>:status=0x<last 4 status values received from the channel for this
device>:flags=0x<tape report bit flags(0x80-Tape
Loaded,0x40-WriteEmul,0x20-RdBlkEmul,0x10-RdCpEmul)>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR, which
indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
Severity INFO
FICN-1078
Message
<timestamp>, [FICN-1078], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:ReadBlkReport:Path=<VEPortNumber HostDomain HostPort DeviceDomain>
<DevicePort LPAR CUADDR DeviceAddr>:Emuls=0x<the number of idle state to non-idle
state transitions while this tape was loaded>:Cmds=0x<the number of emulated host
write commands processed while this tape was loaded>:Chains=0x<the number of
emulated host chains processed while this tape was loaded>:MBytes=<the number of
emulated write megabytes processed while this tape was loaded>
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and write
pipelining was performed on the currently loaded tape.