Fabs system messages, Chapter 27, Fabs-1001 – Dell POWEREDGE M1000E User Manual
Page 265: Fabs-1002, Fabs-1004, Chapter
Fabric OS Message Reference
189
53-1001767-01
Chapter
27
FABS System Messages
FABS-1001
Message
<timestamp>, [FABS-1001], <sequence-number>, FFDC, CRITICAL, <system-name>,
<Function name> <Description of memory need>
Probable Cause
Indicates that the system is low on memory and cannot allocate more memory for new operations.
This is usually an internal Fabric OS problem or file corruption. Description of memory need
indicates how much memory was being requested. The value could be any whole number.
Recommended
Action
Reboot or power cycle the switch.
Severity
CRITICAL
FABS-1002
Message
<timestamp>, [FABS-1002], <sequence-number>,, WARNING, <system-name>, <Function
name> <Description of problem>
Probable Cause
Indicates that an internal problem has been detected by the software. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity
WARNING
FABS-1004
Message
<timestamp>, [FABS-1004], <sequence-number>,, WARNING, <system-name>, <Function
name and description of problem> process <Process ID number> (<Current command
name>) <Pending signal number>
Probable Cause
Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity
WARNING