PLANET WGSW-52040 - Manual (Page 110)

1-109
1.5.5 ftp-server timeout
Command:
ftp-server timeout <seconds>
Function:
Set data connection idle time.
Parameter:
<seconds> is the idle time threshold (in seconds) for FTP connection, the valid range is 5 to 3600.
Default:
The system default is 600 seconds.
Command mode:
Global Mode
Usage Guide:
When FTP data connection idle time exceeds this limit, the FTP management connection will be disconnected.
Example:
Modify the idle threshold to 100 seconds.
Switch#config
Switch(config)#ftp-server timeout 100
1.5.6 ip ftp
Command:
ip ftp username <username> password [0 | 7] <password>
no ip ftp username <username>
Function:
Configure the username and password for logging in to the FTP; the no operation of this command will delete the
configured username and password simultaneously.
Parameters:
<username> is the username of the FTP link, its range should not exceed 32 characters; <password> is the
password of the FTP link, if input option 0 on password setting, the password is not encrypted; if input option 7, the