PLANET WGSW-52040 - Manual (Page 234)

13-3
alarm threshold, it is shown with ‘A+’ or ‘A-’, no tagged parameter is normal.
Example:
Show the brief DDM information of all ports.
Switch#show transceiver
Interface Temp（℃） Voltage（V） Bias（mA） RX Power（dBM） TX Power（dBM）
1/21 33 3.31 6.11 -30.54(A-) -6.01
1/23 33 5.00（W+） 6.11 -20.54(W-) -6.02
13.4 show transceiver threshold-violation
Command:
show transceiver threshold-violation [interface ethernet <interface-list>]
Function:
Show the transceiver monitoring.
Parameter:
interface ethernet <interface-list>: The interface list that the transceiver monitoring needs to be shown.
Command Mode:
Admin mode and global mode
Default:
None.
Usage Guide:
None.
Example:
Show the transceiver monitoring.
Switch(config)#show transceiver threshold-violation interface ethernet 1/21-22
Ethernet 1/21 transceiver threshold-violation information：
Transceiver monitor is enabled. Monitor interval is set to 30 minutes.
The current time is Jan 02 12:30:50 2010.
The last threshold-violation time is Jan 01 1:30:50 2010.
Brief alarm information: