PLANET WGSW-52040 - Manual (Page 56)

1-55
Example:
Set the number of vty threads to 20.
Switch(config)#service terminal-length 20
1.1.26 sysContact
Command:
sysContact <LINE>
no sysContact
Function:
Set the factory contact mode, the “no sysContact” command reset the switch to factory settings.
Parameter:
<LINE> is the prompt character string, range from 0 to 255 characters.
Command mode:
Global Mode
Default:
The factory settings.
Usage guide:
The user can set the factory contact mode bases the fact instance.
Example:
Set the factory contact mode to test.
Switch(config)#sysContact test
1.1.27 sysLocation
Command:
sysLocation <LINE>
no sysLocation
Function: