PLANET WGSW-52040 - Manual (Page 515)

32-55
32.1.16 ipv6 dhcp snooping subscriber-id option
Command:
ipv6 dhcp snooping subscriber-id option
no ipv6 dhcp snooping subscriber-id option
Function:
This command enables DHCPv6 SNOOPING to support option 38, the no form of this command disables it.
Parameters:
None.
Default:
Disable option 38 of DHCPv6 SNOOPING.
Command Mode:
Global configuration mode
Usage Guide:
Only after this command is configured, DHCPv6 SNOOPING can add option 38 in DHCPv6 packets before sending
it to server or relay agent. Make sure that DHCPv6 SNOOPING has been enabled before executing this command.
The system disables option 38 of DHCPv6 SNOOPING by default.
Example:
Enable option 38 in DHCPv6 SNOOPING.
Switch(Config)#ipv6 dhcp snooping enable
Switch(Config)#ipv6 dhcp snooping subscriber-id option
32.1.17 ipv6 dhcp snooping subscriber-id policy
Command:
ipv6 dhcp snooping subscriber-id policy {drop | keep | replace}
no ipv6 dhcp snooping subscriber-id policy
Function: