PLANET WGSW-52040 - Manual (Page 442)

28-53
Switch(dhcp-1-config)#hardware-address 00-00-e2-3a-26-04
Switch(dhcp-1-config)#host 10.1.128.160 24
Related Command: host
28.1.13 host
Command:
host <address> [<mask> | <prefix-length>]
no host
Function:
Specifies the IP address to be assigned to the user when binding addresses manually; the “no host” command
deletes the IP address.
Parameters:
<address> is the IP address in decimal format; <mask> is the subnet mask in decimal format; <prefix-length>
means mask is indicated by prefix. For example, mask 255.255.255.0 in prefix is “24”, and mask 255.255.255.252 in
prefix is “30”.
Command Mode:
DHCP Address Pool Mode
Default:
None
Usage Guide:
If no mask or prefix is configured when configuring the IP address, and no information in the IP address pool
indicates anything about the mask, the system will assign a mask automatically according to the IP address class.
This command is used with “hardware address” command or “client identifier” command when binding addresses
manually. If the identifier or hardware address of the requesting client matches the specified identifier or hardware
address, the DHCP server assigns the IP address defined in “host” command to the client.
Example:
Specifying IP address 10.1.128.160 to be bound to user with hardware address 00-10-5a-60-af-12 in manual
address binding.
Switch(dhcp-1-config)#hardware-address 00-10-5a-60-af-12
Switch(dhcp-1-config)#host 10.1.128.160 24