PLANET WGSW-52040 - Manual (Page 452)

28-63
28.1.26 next-server
Command:
next-server <address1>[<address2>[…<address8>]]
no next-server
Function:
Sets the server address for storing the client import file; the “no next-server” command cancels the setting.
Parameters:
<address1>…<address8> are IP addresses, in the decimal format.
Command Mode:
DHCP Address Pool Mode
Usage Guide:
This command configures the address for the server hosting client import file. This is usually used for diskless
workstations that need to download configuration files from the server on boot up. This command is used together
with “bootfile”.
Example:
Setting the hosting server address as 10.1.128.4.
Switch(dhcp-1-config)#next-server 10.1.128.4
28.1.27 option
Command:
option <code> {ascii <string> | hex <hex> | ipaddress <ipaddress>}
no option <code>
Function:
Sets the network parameter specified by the option code; the “no option <code>“command cancels the setting for
option.
Parameters: