PLANET WGSW-52040 - Manual (Page 613)

38-153
No access-lists configured.
Usage Guide:
After assigning this command for the first time, only an empty name access-list is created and no list item
included.
Examples:
Create an MAC ACL named mac_acl.
Switch(config)# mac-access-list extended mac_acl
Switch(Config-Mac-Ext-Nacl-mac_acl)#
38.17 mac-ip access extended
Command:
mac-ip-access-list extended <name>
no mac-ip-access-list extended <name>
Functions:
Define a name-manner MAC-IP ACL or enter access-list configuration mode, “no mac-ip-access-list extended
<name>” command deletes this ACL.
Parameters:
<name>: name of access-list excluding blank or quotation mark, and it must start with letter, and the length cannot
exceed 32 (remark: sensitivity on capital or small letter).
Command Mode:
Global Mode.
Default:
No named MAC-IP access-list.
Usage Guide:
After assigning this command for the first time, only an empty name access-list is created and no list item included.
Examples:
Create an MAC-IP ACL named macip_acl.
Switch(config)# mac-ip-access-list extended macip_acl